Simline 6

ISDN Simulator with 6 Basic Rate ports and 1 optional Primary Rate port

Product overview

The Simline 6 ISDN network simulator, has six basic rate ports and one optional E1 primary rate port which may be enabled as an upgrade. It performs complete call handling procedures without the need for a PBX or Switch and therefore eliminates the problems associated with real lines. Each unit is supplied with a simple delivered configuration allowing the user to gain full control of the application within minutes. Any changes in the configuration to suit the task may be entered via a user friendly software application provided on CD ROM (Windows 98, NT4, 2000 compliant) and then saved as the new default.

The optional E1 primary rate port may be configured with a range of 1000 DDI numbers or to route calls through to any 1 of the 30 available channels.

Simline 6 can be used with routers, PBX, video conferencing terminals (128K and 384K), terminal adapters, PC applications or any ISDN terminal fitted with a standard S/T interface or a primary rate E1 port. Services such as the combined leased line and ISDN basic rate service offered in some European countries are also supported.

Simline6 BRI PRI Simulator

Product features...

  • Provides reliable ISDN anywhere for complete end-to-end calls to show equipment at it's best.
  • Six basic rate (2B+D) ports and one optional E1 primary rate (30B+D) port.
  • Use for demonstration, test, training or production of any ISDN terminal with a standard S/T or E1 port.
  • True plug and play simplicity.
  • Telephone numbers up to 30 digits in length may be programmed for each channel.
  • Compact & affordable.

Demonstrate Physical Layer (L1), Data link Layer (L2) and Network Layer (L3) operation in real-time with a full English protocol decode while making full bandwidth data or speech calls on your desktop. It is even possible to test just one ISDN terminal connected to the Simline 6 by using an auto-answer mode. Status LED's are provided to indicate activity at all protocol layers including any bearer (B) channels used. Advanced features allow true simulation of different Euro-ISDN network behaviour through user configuration of the numbering plan, timer values, TEI mode and network clearing causes used.

The Simline 6 is very compact and can be used for a very wide range of applications which makes it a great choice when any temporary ISDN lines are required.

Only need two basic rate ports? Find out about the B-LinkU or our four-port B-Link4.

Features and Specifications

No of Ports/ Interface Type 6 Basic Rate (S/T) ISDN Ports.
1 Primary Rate (E1) ISDN Port (optional).
Protocol Support Layer 2 - Q.921 ETSI Euro-ISDN.
Layer 3 - Q.931 ETSI Euro-ISDN.
Supplementary Services Called/Calling Line ID Presentation.
High/Low Layer Compatibility.
BRI Numbering Modes Single Number.
Dual Number.
Multiple Subscriber Number (last digit).
PRI Numbering Mode (optional E1 port) Single Number.
1000 DDI Numbers.
LED Indicators B1 Channel Active.
B2 Channel Active.
PS1 Normal.
PS1 Restricted.
PH (Synchronisation with network Clock).
DL (Datalink Layer).
5v and 3.3v (Confirmation of internal power rails).
Special Features Generation of any required clearing causes to test terminal responses.
Connect and test calls with just one terminal connected using Loopback Mode.
Configure specific timer values to bring down Layer 1 and Layer 2 for simulation of different European network behaviour - BRI Ports Only.
Operating Environment Windows 95/98/NT4/2000/XP.
Note: PC required only for setup of required configuration.
Configuration Interface Serial Port - 9 way D type.
Size/Weight 200mm x 130mm x 50mm. 750g.
Power External universal power adapter with IEC connector.
Warranty One year.

back to top